Battery Chargers: High Performance Chargers

Nowadays people love to own a car that is available with high performance automotive components. These modern cars are equipped with low maintenance chargers that requires none or very little electrolytes topping. This is a clear example of highly advanced automotive technology. The alternators manufactured with this technology make sure that the battery is free from abnormal voltage thus produce high performance. The sequence chargers that one uses in their workshop are required to be very flexible. The versatility offered will ensure that the life of the battery is not very short and there is no any defective process.

The main problem that the user may encountered with sealed strings of maintenance free battery is “gassing”. This problem occurs when the electrolyte is lost that is the result of too elevated charge. The battery chargers are designed to cope up with these sealed batteries that are also called as automotive. These battery chargers cut off the electrical energy between 13.8v and 14.5v in order to prevent the problem of gassing. An automotive battery supplies the electric energy to a car that makes it able to operate. Usually, these batteries are referred as lighting, starting and ignition batteries that is used to provide power to the starter.

The process includes certain chemical reactions that results in releasing electrons, they goes through the conductors and generate electricity. The acid reacts with the plate’s material, being a result of battery discharge. This reaction of certain chemicals is reversed after the battery is charged. The process gets repeated when the plates are restored in their normal condition. The car batteries require regular replacement of water that is lost due to charging cycle. Now very high end designs are available with very less requirement of maintenance. These batteries include electrolytes in some extra quantity that helps in increasing the life of the battery. Any additives or impurities are added to the water it reduces the battery life and its performance. Manufacturers recommend distilled or dematerialized water.

The car batteries must be carefully monitored and charged periodically in order to retain its capacity. While storage it must be charged properly, cleaned up for any corrosion and stored in a dry cool environment. The extreme temperature may increase the rate of self discharge and plate corrosion. The car batteries must be installed within the recommended date by the manufacturer. The date may be printed on in a plain text in an alphanumerical code.

The automotive chargers keep the battery permanently connected when it is required. These automotive chargers are design to provide high functionality thus trusted by many car manufacturers. The chargers are featured with reverse polarity that too with built in protection cut out. These are supplied with a straight cable length. There are certain manufacturers who produce the charger able to fit in the engine compartment by plugging it when required. From 1997, the calcium batteries start being fitted to automobiles with SMART system of charging. It is very necessary to find correct battery replacement to avoid any kind of damage.

Posted in Uncategorized | Comments Off

The History of Automotive Performance Chips

Whether off the line or up the hill, performance-minded drivers demand the most from their vehicles. If that’s you, then you know how frustrating it can be to limp up a steep incline as others fly past, or suffer under excruciatingly slow speeds when towing heavy loads. Luckily, with modern technology, this is a burden you no longer have to bear.

The factory settings in your onboard computer are primarily geared towards a broad range of consumers, preventing high-performance users from maximizing their output. Over the years, tech manufacturers have invested heavily in the development and production of aftermarket performance chips, like Dodge chips, Ranger performance chips and the Toyota Tacoma chip, to recover this lost performance easily, affordably and safely.

Beginning with the space race in the 1940s and 1950s, the drive to make technology smaller and lighter gave way to the development of microchips and computers. Engineers and manufacturers across the board imported and adapted this NASA-pioneered technology, incorporating it into hundreds of products that range from toasters and microwaves to automobiles and dishwashers.

Similar to NASA rockets, the system in a car is monitored and controlled by microchips. These microchips control everything from the cabin temperature and radio to the automatic windows and-most importantly-engine performance.

The engineering and resulting output of an automobile has improved greatly within the past century, making small adjustments now more important than ever. That’s why drivers who regularly haul heavy loads or tow boats and campers look to the performance chip as a means of recapturing some of the lost performance in a factory-tuned vehicle. Performance chips, like the Honda Accord chip, Pontiac PCM and Chevy chip, don’t make drastic changes to the operation of your vehicle. They simply restructure the fuel system to increase efficiency and horsepower, working in unison with other performance-enhancing upgrades like air intakes and custom exhaust systems.

On average, performance chips take 5-10 minutes to program and no more than 20 minutes to install. Available in a couple different types, including chips that plug into your OBD-II port, located under your dashboard, or chips that remain permanently connected to your onboard computer, performance chips make adjustments to your air/fuel ratio, ignition timing and other variables to maximize the output of your vehicle. For example, they may supply more fuel at full throttle at every engine speed or change the spark timing.

Posted in Uncategorized | Comments Off

Automotive Performance Upgrades

Considering some performance enhancements to your car, or new to performance scene? Here is an article designed to help you learn the basics.

First of all, you want to have a “well-oiled machine” in order to start performance work on your car. Keep up with the basic maintenance requirements and make sure everything else is performing as it should before you begin upgrading (i.e. no check engine light, no fluid leaks, etc.). However, you can incorporate performance enhancements into your basic maintenance as well. For example, if you have a car that’s due for a tune up, you can use Iridium spark plugs, and a K&N air filter, or upgraded ignition components such as MSD ignition products, bigger wires, etc. You also always want to use high-quality oil in your vehicle. Your vehicle is your baby, take care of it and it will reward you every day. High quality oil only costs a few dollars more, and you’ll drive with confidence knowing the internals of your engine are lubricated with the good stuff. Oils we recommend are Castrol GTX, Mobil 1 Synthetic, and Royal Purple.

If you’re looking for something a little more hopped up, look into getting a high performance exhaust. Opening up the exhaust will open up the air flow coming from your engine and remove restrictions that cause poor performance. If you live in a pollution-regulated state or district, make sure to choose an exhaust system that is certified to pass emissions tests or is 50-state legal. Call us and we can recommend an exhaust for you to purchase and have installed at our shop. Magnaflow is a good-quality brand that covers most makes and models of vehicles at an affordable price. In addition to performance exhaust systems, you can also choose modifications such as headers and downpipes, and free-flowing catalytic converters.

Next, you’ll want to upgrade your air intake system. Depending on your vehicle, a cold air intake is going to be the best performance for your money. A cold air intake not only opens up the airflow coming into your engine, it also re-routes the factory airbox system to a location where heat from the engine won’t increase the temperature of the air coming in. Most high-quality cold air intakes are designed by engineers with years of experience on specific vehicles that have optimized the location of the incoming air filter to be the in the coolest spot possible. When researching cold air intakes, you want to go for quality not price, it will make a big difference in the horsepower you can get out of it. Recommended brands are Injen, AEM, K&N, and others depending on your make and model.

Suspension and Steering is another department in which a lot of aftermarket upgrades are available. Again, if you’re due for maintenance like changing your struts or replace your coil springs, you may want to look at installing aftermarket parts since you’re going to be spending the money anyway. Most of the suspension upgrades you do will go hand in hand with the amount of horsepower you’re adding to the car. You want to make sure your car is going to be able to physically handle the added power. Even if you’re not going for huge amounts of horsepower, an aftermarket suspension will increase your vehicle’s overall handling capabilities and ride comfort. Depending on the make of your vehicle, some great brands are Koni, KW, H&R, and TEIN. There are many choices available, call us before you decide so we can help you choose the best ride quality and handling for your personal tastes and budget.

Still want more power? By this time you’ve developed what we call the “addiction” to performance. There is a whole world of aftermarket upgrades out there, from computer chips to engine building to forced induction to full-on nitrous foggers. By then your car will have transformed into a full-blown street or race machine, and your wallet will be lighter. However far you choose to go with it, we are here for you to provide recommendations on parts and install whatever you choose to go with.

Thanks for reading, and don’t hesitate to call us at (888) 806-6283 and we can custom-design a performance package for your vehicle and ship the parts directly to your door or a qualified shop of your choice. In Florida? Considering bring the vehicle to our shop in Sarasota for a professional consultation and installation.

Posted in Uncategorized | Comments Off

Cool Runnings With a New Brand of Automotive Lubricants

Reducing friction between surfaces that connect, automotive lubricants create an essential film that reduces wear. Constant contact between two moving surfaces can generate a huge amount of heat and causes abrasion that must be reduced for machinery to work properly. The job of lubricants is to keep engines running cool and running smoothly.

New Blending Technology

Automotive lubricants are continually being analyzed and improved to find the most appropriate blends for specific tasks. Essentially, lubricants need to possess a high boiling point and low freezing point, as well as thermal and hydraulic stability. Also vital are a lubricant’s ability to release water, prevent corrosion of parts and resist oxidation. New blending technology is encouraging formulations to emerge that enhance machine lifetimes and reliability.

The Viscosity Index

Informally, viscosity is the measure of ‘thickness’ of a liquid. Oil is thicker than water, and automotive lubricants are at their best when the film created by the lubricant provides a strong barrier to wear without losing fluid movement between parts. The most vital property of any lubricant is its viscosity. Gasoline engine oils for example, overcome the limits of other more general oils and are specifically designed to improve performance in passenger cars, minimizing sludge and preventing oxidation.

Ignition Performance

Spark ignition and compression ignition engines rely on automotive lubricants to function well. A careful balance of base oil and numerous additives blended together promise better ignition performance. Depending on the engine ignition requirements, these additives are a blend of a number of additive families. These include antioxidants, detergents, metal deactivators, friction modifiers, anti-foaming agents and other additives enhancing ignition performance.

Reliable Automotive Lubricants

The challenge for lubricant manufacturers of this century is to understand an ever-increasing range of lubricant functions. Creating blends to match the most stringent requirements, the lubrication industry demands constant innovation. Companies with strong research and development units are the forerunners of new formulations of reliable automotive lubricants.

Meeting Industry demands

The automotive industry demands high value creation and cost-effectiveness. Formulating automotive lubricants using customer insights is becoming a crucial process. Manufacturers are provided with information critical to developing new formulations, and acknowledge the most important role in the value chain. Incorporating additives with really fine particles – Nano WS2 technology – ensures the industry demand for effective lubricants is being met with advanced research and development.

Selecting Lubricants

The market for automotive lubricants is becoming more discerning. Access to an ever-expanding circle of knowledge and the ability to expose poorer quality products is driving the desire for perfection in lubricant production. There’s a focus on the role of antioxidants in reducing emissions, and extending the life of engines through extending lubricant life. New engine specifications are also influencing lubricant selection.

Posted in Uncategorized | Comments Off

Exhaust Wrap Performance Benefits

With modern day performance vehicles, engines can produce a significant amount of engine heat. These extreme temperatures can diminish total performance and potentially cause exterior engine components to fail prematurely. Thankfully, there are exhaust wrap products available which may reduce engine compartment temperatures by more then fifty percent.

Exhaust wrap rolls are not new to the automotive industry. For quite a while, these wraps have been manufactured out of glass fiber and were commonly stocked on auto part store shelves. However, new designs in wrap technology have been brought to the market that offers superior heat protection when compared to the old style glass fiber wrap rolls. These days the best performing wraps are made from pulverized lava and offer a thermal rating of approximately 500 degrees above those designed with glass fiber.

Applying exhaust wrap rolls is a very easy process which most vehicle owners can handle themselves. The exhaust manifold pipes are simply wrapped with 1/4″ overlaps. The start and stop point of each wrap must be fastened with a special rated high-temp stainless steel clamp. This will prevent the wrap from coming apart.

In most cases it is simpler to install the wrap with the vehicle safely raised off the ground. Because glass fiber exhaust wraps are stiff, many installers find that first wetting the wrap makes it much easier to shape to hard curves. Pulverized lava rock wraps are very flexible and usually can be quickly installed directly out of the package without being wet.

Old style glass fiber wrap rolls must have a finished coating of high temperature silicone spray sprayed on them. This protects the installed wrap from dirt and the grease that is normally found in engine compartments. Exhaust wraps produced from pulverized lava rock do not need any exterior protective coating sprayed on the installed wrap. Pulverized lava naturally repels most debris.

In the performance automotive industry, many vehicle owners have shifted towards exhaust wrap products manufactured from pulverized lava rock. Not only does pulverized lava provide greater thermal protection, but it is also much easier to install. And for less than $100, many vehicle owners can obtain the additional benefits of improved horsepower and external engine part protection.

Posted in Uncategorized | Comments Off

Know the Matters and Get the Best Benefits From Automotive Batteries

Automobiles need batteries to get electric energy and for this purpose, automotive batteries were invented. These batteries are rechargeable and small in size, so that they can be set up in automobiles very easily. Especially, it is regarded as an automotive battery. The work of an Starting, Lightning and Ignition is to supply energy to the starter motor for an automobile.

Six galvanic cells are used to make these batteries and they are usually lead acid type. At full charge, an automotive battery provides 12.6 volts. One single Starting, Lightning and Ignition is enough for a small vehicle. But heavy vehicles like highway trucks, tractors etc. that have diesel engines use more than one batteries.These batteries are recyclable, for this reason, they are environment friendly too. And through this process, every year a huge number of batteries are produced. There are usually four types of automotive batteries. They are described below shortly:

• Flooded Cell Type: These types of automotive batteries are inexpensive and working for long time period. But, they require a lot of maintenance and care. But, they can be leaked or spilled at any moment.

• Valve Regulated Lead Acid: They are the alternatives of Flooded Cell type batteries and more expensive than Flooded Cell Type Batteries. These batteries are also known as “sealed” batteries. You cannot repair these batteries and maintain them neither. Hydrometer cannot be used to measure the charge of these batteries and you cannot replenish the electrolyte too. These batteries are maintenance free and are usually used to stay safe from any kind of leakage.

• Shallow Cycle: To start an automobile engine, a large burst of power is needed. And for this purpose, Shallow Cycle batteries are really useful. They can produce a strong power when an engine starts. After that, they are charged by the engine driven charging system. They contain higher specific gravity electrolyte so that the internal resistance can be reduced. Many thin separated plates are used to make these batteries.

• Deep Cycle: These types of batteries are made to provide continuous power for a long period of time. Especially, the small vehicles such as small boats, recreational vehicles, golf cart etc. use these types of batteries. To store energy from wind turbine or photovoltaic array, they are used too.

To use your battery for a long period of time, you have to follow some certain rules. Car batteries that use lead antimony plates may need water regularly. Specialists recommend using distilled water in a particular level. But, nowadays, most of the batteries do not require this watering. Always try to use a charging method that is safe. The most popular charging method is Trickle Charging. Do not over charge your or keep for a long time on charging. This may reduce your product lifetime. And even they can be dangerous.You should also be careful about storage and changing. And such, you can get the best service from these batteries.These processes are also useful for your own safety.

Eastman Industries Ltd. one of the leading auto battery manufacturers in India. Eastman offers a wide range of high quality automotive batteries, Vrla battery manufacturers, inverter and motorcycle batteries of JIS and DIN series.

Posted in Uncategorized | Comments Off

Choose the Right Automotive Equipment Distributors – It’s in Your Best Interest!

Do you want your shop to be the one that people turn to when they want the very best auto repair service? Then, you will need to have the very best equipment in the business! It is no secret that car models keep changing every single year and it makes great sense to ensure that you purchase equipments that are up to date.

It is no secret that the internet is filled with different Automotive Equipment Distributors, but only few of these distributors provide all the equipments that you will need at a really pocket friendly price. A good auto equipment distributor will provide world class equipments without charging you an arm or leg.

At a good equipment distributor, you can shop for tools and equipments that are specifically designed to make your auto repair service job a whole lot easier.

A reputable and reliable automotive equipment distributor such as “Automotive Equipment Distributors” provides customers with top quality automotive tools at awesome prices. Customers can even get great deals on great wheel alignment systems such as Hunter wheel alignment system.

The market of auto equipments for both personal and commercial use offers a whole lot of tools and equipments. If you want to add much more advanced tools to your auto workshop or you are just starting out your auto repair service, you will need to do some research on good auto equipment distributor online so that you do not end up purchasing equipments from a distributor with a questionable reputation in the industry. When you log on to the website of reliable and reputable automotive equipment distributors, you will not only get to learn a lot about the different kinds of auto repair equipments, you will also get to learn how to operate these machines safely as well.

Even for just routine checks, every auto shop needs auto equipments such as auto lifts, as a matter of fact, these auto lifts are fast becoming an important part of every auto shop.

You can find the following auto equipments (and more!) at a good equipment distributor:

* Tire changers
* Wheel balancers
* Alignment lifts
* Brake lathes
* Drive tools
* Power tools
* Compressed air systems
* Lighting
* Material handling
* Storage
* Furniture
* Engine hoists and stands etc

Nowadays, many individuals have their own vehicles and in a lot of cases, they choose to maintain their vehicles by themselves – the internet is filled with DIY learning materials! Such individuals can shop for auto equipments (for personal use) at an auto equipment distributor’s website and save tons of cash on their purchase.

The internet is indeed a really great place to shop for and find reliable and reputable automotive equipment distributors that will not only offer top quality auto repair and lift equipment, but also offer un-ignorable prices as well.

You can shop for all your auto repair shop equipment needs on the internet and have all your purchases delivered straight to your door step – in one piece!

Posted in Uncategorized | Comments Off

Auto Recycler for Your Damaged Car

Motor vehicles are the most recycled products because of the availability of auto recyclers. Auto recycling entails stripping a vehicle off its reusable parts and then crushing the remaining body. The reusable parts are sold and the crushed portion is recycled by a scrap processor.

Why recycle?

This is done to reduce wastage. Numerous cars are written off as scrap every year. It makes sense to remove the parts that can be used and reuse them. This is not only beneficial for the environment but also makes auto parts available at affordable prices to consumers. In fact, the car manufacturers bear recycling in mind while manufacturing cars. Hence, they provide parts that are long-lasting.

As is apparent, an auto recycler works on the principle of conserving the environment. The three Rs of environment conservation are Reduce, Reuse and Recycle.

This implies using fewer natural resources for conserving the environment. If auto parts are reused, then a lesser quantity needs to be manufactured. If manufacturing reduces then the natural resources used are reduced.


Reusing has a positive impact on the environment. Hence, auto parts that are removed and sold enable reducing the landfill.


Recycling auto parts is the basic function of a recycler. Recycling helps conserve the environment as it reduces landfill and depletion of the environment for creating new parts.

Benefits of auto recyclers:

Good for the earth:

• Recycling is beneficial for the earth because of the following reasons:
• Reduces dangerous toxins from being released into our ground and water.
• It prevents the use of valuable landfill.
• It helps preserve the natural resources as it reduces the need for manufacturing new parts.

Good for your wallet

Recycled parts are available at nearly half the price as the original. Hence you save a good amount by purchasing them.

Good for your vehicle

The recycled parts are original and genuine made as per the original manufacturer’s specifications. In fact, many sellers of recycled parts even provide a warranty for them.

Hence, we see that auto recyclers, recycle End-of-life vehicles and protect water, air, and soil from harmful material contained in them.

So, if you have an end of life car, why sit around with it? Anyway, damaged cars do not have a book value so establishing a price for it will be difficult. Sell it to an auto recycler and earn cash in exchange! You will be doing your bit for the environment as well!

Posted in Uncategorized | Comments Off

Economize the Maintenance of Your Car by Using Recycled Parts

Auto recycling is one of the most widespread recycling industries globally. Auto parts are recycled from end-of-life cars. Damaged and old cars have usually have no takers. Hence, instead of just abandoning them, it makes sense to recycle their parts.

How are cars recycled?

• Damaged cars are bought by auto wreckers or recyclers. They are taken to auto recyclers which are large, open spaces for such cars.
• Over here, the car is inspected to check whether it can be repaired and reused or it is a write-off.
• In most cases, the car cannot be reused. Hence, the next step is to recycle it.
• Recycling entails removal of usable parts and their sale. This is followed by disposal of the parts that cannot be reused.
• Most of the parts such as the car stereo, windshield, wipers, mirrors, headlights, taillights, etc. if not damaged are sold in the market.
• Parts such as battery are removed and used to manufacture new batteries.
• Tires are used to make pavement bases for new roads.
• Wheels are removed and sold as metal scrap.
• If the glass is damaged, it is recycled to make porcelain, jewelry, beads, tiles, etc.
• After removal of all the parts and the various oils and fluids. The next step is the disposal of those fluids in a manner so that they do not affect the environment.
• Finally, the metallic portion of the car is left. This is crushed so as to reduce its size and then it is sold to a shredder.
• Most parts of the car are intact and can be reused. Many auto recyclers get the damaged parts restored so that they can be sold.

Every car needs spare parts for maintenance at some stage or the other.

Buying recycled parts is better than buying the original because:

1. These parts are available at nearly half the price of the original.
2. Since they have been removed from original cars, they provide a good fit.
3. These parts are genuine.
4. Many sellers of used parts provide a warranty for their products.
5. Recycling car parts helps in conserving the environment. This is because it reduces the need to manufacture new parts; since most parts are reused, the landfill is reduced; The pollutants are disposed of. By using these parts, you can also contribute towards conservation.

Hence, we see that using recycled car parts is not only beneficial to us but also works for the bigger cause of saving the planet.

Whether you need to buy or sell used car parts, you can do it with the help of Parts Locator, a leading auto parts resource in Australia. To know more visit here.

Posted in Uncategorized | Comments Off

Benefits of Recycling a Car

When a car is wrecked or damaged, what do you do with it?

Your options are repairing it and reusing it. Many a time this is not possible. In such cases, you can sell your car to an auto-dismantler. An auto-dismantler recycles the car for repairing other cars, selling used parts, etc.

An auto-dismantler removes all the functional and non-functional parts from a car. It also removes various fluids. The metallic portion that remains is crushed into a small piece and shred into pieces.

Recycling of wrecked cars has become a lucrative business option because the number of users of recycled car parts has increased.

Reasons for users of recycled car parts increasing:

• They are nearly half the price when compared to new parts.
• Manufacturers of car parts make these parts so that they are durable. This ensures that these parts last even after the car reaches its end-of-life.
• Used car parts have a good fit as they have been detached from original vehicles.
• Used car parts market caters to a wide range of cars.
• For cars whose models have been discontinued, the only option to look for spare parts is used car market.
• Vintage cars can find their spares in the used car market.

Besides these benefits, an auto-dismantler benefits the environment also. Imagine if cars were not dismantled and reduced in size, how much of waste we would generate? Cars also contain various hazardous and non-hazardous fluids which can impact the environment adversely.

Let us see what service an auto-dismantler provides to the environment:

1. Recycling of parts:

Various parts are removed from the car. Those that are intact are sold ‘as is’ in the market. Those that can be repaired are restored and sold. Others that cannot be reused as functional parts are used in other applications. This reduces wastage and saves landfill. It also conserves our natural resources by reducing the need to manufacture new parts.

2. Recycling fluids:

A car contains many fluids such as coolant, brake fluid, transmission fluid, etc. Some of these fluids are recycled and can be reused. While some other fluids can be converted into fuels, etc. and reused. This is beneficial to the environment because some of these fluids contain harmful chemicals. If they are released into the earth, they can be detrimental to the health of animals, aquatic creatures, and humans. Some fluids are inflammable and so cannot be released into the environment.

3. Recycling Steel:

Steel is required for a variety of applications. But its manufacture uses up valuable natural resources. Therefore, recycling steel reduces the need to manufacture fresh steel positively impacting the environment.

Hence, we see that dismantling and recycling a car is beneficial in numerous ways.

Recycling auto parts has become very popular in recent times.Parts Locator is a source through which you can buy and sell used car parts. To know more visit here.

Posted in Uncategorized | Comments Off